Call 0151 933 8737 or Email sales@apexshelters.co.uk
Theta Bike Compound
Bike Shelters are available with helmet lockers to the rear of the shelter

Call The Office
Tel: 0151 933 8737
Mobile: 07540244339
Office Location
STL Shelters Ltd,
4B Birchall Street, Bootle,
Merseyside L20 8PD
Email Us
Theta Bike Compound
Gates can be added to the Theta Bike Shelter to provide additional security. Gates are fitted with a hasp and staple (as standard) for padlocking. Padlocks are not supplied. Alternative locking methods, such as key operated or coin retain/return can be incorporated. See Page 25 for locking mechanisms. If the area is restricted sliding gates could reduce the footprint of the shelter.
General Specification of Bike Shelter
Lengths: 4060mm and 5060mm, other sizes are available
Capacity: 10 cycles or 4-5 motorcycles, 12 cycles or 5-6 motorcycles respectively.
Overall width: 2100mm
Height to front: 2100mm
Finish: Available in hot dipped galvanised to BS EN ISO 1461: 1999 or polyester powder coated to a standard BS or RAL Colour
Roofing: Plastisol Coated Steel to a standard BS or RAL Colour (Alpha P) or 5mm thick transparent PET (Alpha T)
Fixing: Adjustable base plates for bolting to concrete or extended legs for submerging into concrete
Construction: Bike Compounds can be linked to form continuous runs..
INSTALLATION
Bike Shelters and Compounds have been designed for ease of installation and are supplied in a flat pack form with full technical installation instructions. Alternatively, a full nationwide installation service is available including ground-works.
Please contact the sales office for further information.
THETA TBEP iR CYCLE COMPOUND
Loading single-sided into integral fully welded cycle racks. If required, racks can be floor-mounted. If junior versions are required, please contact the sales department. Please enquire to the sales department if shelters are required to meet the BREEAM standards as the racks need to be spaced at 1000mm centres.
LOCKING MECHANISMS
A range of locking mechanisms are available; including a hasp and staple, which is fitted as standard, unless specified, a sliding bolt, (padlocks are not supplied with either above option), a coin return/retain or a card swipe system.
END PANELS (EP)
5mm thick Transparent PET End Panels are available.
Back Panels
Plastisol Coated Steel to a standards BS or RAL Colour or 5mm thick Transparent PET
ADDITIONAL BAYS
Bike Shelters can be supplied any length to suit your requirements.

Why Buy From STL Shelters?
- All products are easy to assemble
- All products are of durable, robust construction with no climb frames
- All products are price competitive
- We provide rapid delivery times
- Don't want to install yourself? Ask about our fast installation service!
Tel: 0151 933 8737
Mob: 07540 244 339
STL Shelters Ltd
4B Birchall Street
Bootle, Merseyside
L20 8PD