Delta P Motorcycle/Cycle Shelter

Delta P Motorcycle Shelter

Delta P iMc Motorcycle Shelter

The Delta shelter is a dual access shelter for sorting either motorcycle and/or cycles.   Motorcycles can be free-standing or the shelter can be supplied with a locking rail to the rear of the shelter so motorcycles can be secured via a ‘D’ lock.

The photograph shows a Delta P combined cycle and motorcycle shelter.

GENERAL SPECIFICATION

Lengths: 2560mm, 3060mm, 4060mm and 5060mm
Capacity: 12 cycles or 4-6 motorcycles, 16 cycles or 6-8 motorcycles, 20 cycles or 8-10 motorcycles, 24 cycles or 10-12 motorcycles respectively.
Overall width: 3800mm
Height to front: 2100mm
Finish: Available in hot dipped galvanised BS EN ISO 1461: 1999 or polyester powder coated to a standard BS or RAL Colour
Roofing: Plastisol Coated Steel to a standard BS or RAL Colour  (Alternatively, shelter can be fitted with 5mm thick transparent PET.)
Fixing: Adjustable base plates for bolting to concrete or extended legs for submerging into concrete
Construction: Shelters can be linked to form continuous runs

INSTALLATION

Shelters have been designed for ease of installation and are supplied in flat-pack form with full technical installation instructions. Alternatively, a full nationwide installation service is available including ground-works. Please contact the sales office for further information.

DELTA iR CYCLE SHELTER

Double-sided into integral fully welded cycle racks. If required, racks can be floor-mounted. If junior versions are required, please contact the sales department.

DELTA iMC MOTORCYCLE SHELTERS

Loading: Integral fully welded rail to rear of shelter for
securing motorcycles

END PANELS (EP)

Theta End Panels are available in 5mm thick transparent PET

BACK PANELS

Back panels Plastisol Coated Steel £135.00 based on 5m shelter Back panels 5mm thick transparent PET £399.00 based on 5m shelter

ADDITIONAL BAYS

Shelters can be supplied any length to suit your requirements.

Please call the sales office for a quotation.