Alpha Shelters can be used to create a lockable compound by opposing 2 shelters. Lockable gates can be fitted to one or both sidesĀ allowing 2 entrances. Alternatively, one side can be fitted with a fixed security panel. A variety of locking mechanisms are available for the gate, including a hasp and staple (which is fitted as standard) or a sliding bolt, (padlocks are not supplied with either option), a coin return or a coin retain or a card swipe system are also available. Roof panels can be fitted to the walkway to provide enhanced weather protection. Vandal-resistant lighting can also be installed as required.
GENERAL SPECIFICATION
Lengths: 4060mm and 5060mm, other sizes are available
Capacity: 20 cycles or 8-10 motorcycles, 24 cycles or 10-12 motorcycles respectively
Overall width: 6000mm
Height to front: 2100mm
Finish: Available in hot dipped galvanised to BS EN ISO 1461: 1999 or polyester powder coated to a standard BS or RAL Colour
Roofing: Plastisol Coated Steel to a standards BS or RAL Colour or 5mm thick Transparent PET
Fixing: Adjustable base plates for bolting to concrete or extended legs for submerging into concrete
Construction: Shelters can be linked to form continuous runs.
End Panels: 5mm thick transparent PET
INSTALLATION
Shelters have been designed for ease of installation and are supplied in a flat pack form with full technical installation instructions. Alternatively, a full nationwide installation service is available including ground-works.
Please contact the sales office for further information.
OP/ALPHA TEP iR CYCLE COMPOUND
Single or dual access compound with fully welded integral cycle racks. If required, racks can be floormounted. If junior versions or motorcycle racks are required, please contact the sales department. Please enquire to the sales department if shelters are required to meet the BREEAM standards as the racks need to be spaced at 1000mm centres.




Facebook
Twitter
RSS